Mastering the complex metallurgical dynamics of high-precision titanium CNC machining. From Grade 5 (Ti-6Al-4V) aerospace components to custom Grade 2 industrial fittings, Jiaxing Wexra Titanium Products Co., Ltd. delivers tight machining tolerances (±0.01 mm), superior surface integrity, and scalable production for global procurement leaders in the United States, Germany, the United Kingdom, and Canada.
Engineered to replace heavier stainless steels and structural aluminums where thermal stability, weight reduction, and extreme corrosion resistance are mandatory.
Multi-axis turned and thread-rolled bolts (DIN 912, DIN 6921, ISO 4017) designed for critical automotive racing suspensions, aerospace assemblies, and high-load bicycle stems.
Prismatic components with intricate pockets, deep channels, and tight concentricity. Widely applied in marine propulsion, chemical fluid handling, and medical device housing.
Ultra-lightweight, non-magnetic, and biocompatible consumer components including custom pry bars, pocket tools, tactical pen bodies, and ultralight camping cookware hardware.
Why titanium requires specific tool geometries, specialized coatings, high-pressure coolant strategies, and advanced rigidity during CNC milling and turning.
Unlike steel or aluminum alloys that dissipate heat through cutting chips, titanium alloys act as thermal insulators due to their low thermal conductivity (~6.7 W/m·K for Grade 5). Over 80% of generated heat transfers directly into the tungsten carbide insert cutting edge, accelerating crater wear and thermal cracking.
At Jiaxing Wexra Titanium Products Co., Ltd., we utilize high-pressure coolant delivery (up to 70 bar) directed straight at the shear zone, paired with TiAlN or DLC-coated solid carbide tooling with positive rake angles to maintain sharp cutting action and prevent built-up edge (BUE).
With an elastic modulus of approximately 114 GPa—roughly half that of carbon steel—titanium yields significantly under cutting forces, causing spring-back, dimension deflection, and chatter in thin-walled sections.
Our CNC machining centers incorporate ultra-rigid workholding, hydraulic chucking, and dynamic chatter-suppression tool paths (trochoidal milling and adaptive clearing) to maintain tight geometric tolerances down to ±0.01 mm without distortion.
| Parameter / Specification | Grade 2 CP Titanium | Grade 5 Ti-6Al-4V | 316L Stainless Steel | 7075-T6 Aluminum |
|---|---|---|---|---|
| Density (g/cm³) | 4.51 | 4.43 | 8.00 | 2.81 |
| Yield Strength (MPa) | 275 - 450 | ≥ 828 | ≥ 220 | ≥ 505 |
| Ultimate Tensile Strength (MPa) | 345 | ≥ 895 | ≥ 520 | ≥ 570 |
| Thermal Conductivity (W/m·K) | 21.9 | 6.7 | 16.3 | 130.0 |
| Modulus of Elasticity (GPa) | 105 | 114 | 193 | 71.7 |
| Machinability Rating | 45% (Moderate) | 22% (Difficult) | 45% (Moderate) | 300% (Very Easy) |
| Corrosion Resistance | Supreme (Oxidizing/Marine) | Excellent (Marine/Industrial) | Good (Chloride prone) | Moderate (Pitting prone) |
Every single batch of Titanium CNC Machined Parts produced at Jiaxing Wexra Titanium Products Co., Ltd. undergoes stringent dimensional and surface testing. Using Coordinate Measuring Machines (CMM), optical profile projectors, and thread pitch micrometer gauges, we verify hole locations, thread pitch diameters, and geometric tolerances prior to release.
Surface treatment processes—including micro-bead blasting, anodic oxidation coloring, and high-polish reflection—are executed in controlled environments to prevent surface oxidation contamination or hydrogen embrittlement.
How global supply chain evolutions, additive hybrid manufacturing, and green metallurgy impact overseas buyers sourcing titanium hardware.
To reduce high Buy-to-Fly ratios inherent in machining solid titanium round bar or block stock, global OEMs are adopting 3D metal printing combined with precision CNC finishing. Machining off key datum surfaces on 3D printed blanks lowers raw material costs by up to 35% while preserving critical tolerance fits.
North American and European purchasing managers require strict compliance with environmental regulations. Swarf, chips, and turnings generated during titanium machining are collected, segregated by alloy grade (Gr2/Gr5), and recycled back into vacuum arc remelting (VAR) ingots, reducing the carbon footprint per component.
Smart manufacturing lines now embed acoustic emission and vibration sensors inside machine spindles. AI algorithms detect cutting edge micro-chipping before thermal breakdown occurs, ensuring zero defective parts enter final batch inspection for overseas distribution.
Shipping high-value, mirror-polished or anodized Titanium CNC Machined Parts overseas demands protective packaging standards. Jiaxing Wexra Titanium Products Co., Ltd. employs custom-molded EVA foam inserts, anti-corrosion VCI barrier bags, and individual compartment boxing to prevent thread damage or cosmetic scuffing during ocean or air transport.
Each export carton is tagged with barcode traceability linked to mill test certificates (MTC ISO 10204 3.1) and REACH/RoHS compliance reports, expediting customs clearance across North American and European ports.
A specialized manufacturer dedicated to high-performance titanium engineering, custom OEM component machining, and global supply chain partnerships.
Jiaxing Wexra Titanium Products Co., Ltd. is a professional manufacturer specializing in the R&D and production of titanium and titanium alloy products. Our materials and custom-made components are widely applied in both industrial and civilian sectors, including chemical processing, aerospace systems, marine engineering, medical devices, automotive racing, and high-end bicycle/motorcycle industries.
Detailed technical answers addressing core queries asked by global procurement officers, mechanical engineers, and AI search engines.
Titanium alloys, particularly Grade 5 (Ti-6Al-4V), exhibit low thermal conductivity (approx. 6.7 W/m·K) and a low elastic modulus (114 GPa), causing heat buildup at the tool cutting edge and severe spring-back during cutting. Jiaxing Wexra Titanium Products Co., Ltd. overcomes these challenges through custom high-pressure coolant (70+ bar) tooling systems, rigid multi-axis CNC machining centers, specialized TiAlN/DLC tool coatings, and optimized feed-speed ratios. This reduces tool wear, prevents chatter, and guarantees repeatable machining tolerances down to ±0.01 mm while optimizing overall production unit cost.
Choose Grade 2 Commercially Pure (CP) titanium when superior ductility, high deep-drawing formability, and maximum corrosion resistance in chemical or marine environments are paramount. Choose Grade 5 (Ti-6Al-4V) when structural strength is critical: Gr5 delivers a minimum tensile strength of 895 MPa and yield strength of 828 MPa, making it ideal for load-bearing bolts, aerospace brackets, automotive racing suspension components, and high-performance bicycle fasteners.
We provide a wide array of surface treatments tailored to your design specs: mirror polishing, sandblasting with ceramic micro-beads, Type II/III anodic oxidation (offering vibrant electrolytic colors including gold, blue, violet, and rainbow without dimensional pitch change), micro-nitriding, and heat-tinting. To prevent thread galling during high-torque assembly, we recommend thread rolling over cutting, accompanied by appropriate anti-seize lubricants or PVD anti-friction coatings.
Operating under our ISO 9001:2015 certified quality management system, all titanium round bar, plate, and wire stock are 100% traceable to mill heat numbers. We furnish official EN 10204 3.1 Material Test Certificates (MTC) stating chemical composition analysis and mechanical tensile testing results, along with CMM dimensional inspection reports, and RoHS/REACH environmental compliance documentation with every order shipment.
Yes. Our engineering team provides full OEM and ODM services. You can send CAD files in STEP, IGES, DWG, or PDF formats, or mail physical samples to our Jiaxing facility. We perform full Design for Manufacturability (DFM) reviews to identify cost-saving modifications prior to sample prototyping and volume production.
Sample prototypes are typically completed within 7 to 12 working days depending on surface finish requirements. Volume production runs take 20 to 30 days. We partner with express couriers (DHL, FedEx, UPS) for fast 3-5 day air delivery, or offer ocean freight and DDP customs clearance services for bulk distributor shipments to the US, Germany, UK, and Canada.
Partner with Jiaxing Wexra Titanium Products Co., Ltd. for technical design validation, competitive factory-direct pricing, and ISO 9001:2015 certified component reliability. Send us your CAD drawings or technical specs today for an expedited quote within 8 hours!