Titanium Exhaust Studs Factories & Supplier serving the Gouyave market

Titanium has a relatively noble galvanic potential. However, unlike stainless steel—which frequently causes catastrophic pitting and seizing in cast aluminum under hot salt spray—titanium passivates with a dense TiO2 film. When paired with high-temperature nickel or copper-based anti-seize paste during installation, galvanic corrosion is virtually non-existent, permitting effortless stud removal even after years of continuous marine service.

Grade 2 titanium is commercially pure and exhibits excellent chemical corrosion resistance, but its tensile yield strength (approx. 275-350 MPa) is insufficient for the clamping loads required on exhaust manifolds and cylinder heads. Grade 5 is an aerospace alloy with 6% Aluminum and 4% Vanadium, providing tensile strengths exceeding 895 MPa—well above Grade 8.8 and equivalent to high-tensile 10.9 steel. This makes Gr5 the mandatory specification for load-bearing thermal exhaust studs.

Standard inventory items (such as standard M8 × 1.25, M10 × 1.25, and M10 × 1.50 studs and 12-point flange locking nuts) are packaged within 48 to 72 hours. Shipments to Grenada travel via express air freight (DHL, FedEx Express) delivering directly to St. George's or Gouyave within 5 to 9 business days, or consolidated ocean freight via Miami / Caribbean logistics hubs for bulk commercial container orders.

Yes. We regularly supply OEM/ODM custom thread configurations (including stepped studs like M10-to-M8, extended lengths for aftermarket turbo headers, broached internal hex ends, or custom UNF/metric hybrid threading). Simply supply a 2D engineering drawing, 3D CAD model, or mail a physical sample to our Jiaxing facility for optical profiling and sample manufacturing.

Titanium-on-titanium or titanium-on-steel contact requires clean threads and a generous coating of marine-grade high-temperature anti-seize lubricant (such as nickel or moly-based grease). Due to the lower friction coefficient provided by the lubricant and titanium's smooth rolled thread finish, torque settings should typically be adjusted by approximately 10% to 15% below dry steel factory specifications to achieve the exact target clamping force without overstretching.

Every shipment from Jiaxing Wexra Titanium Products Co., Ltd. is accompanied by an official EN 10204 3.1 Material Test Certificate (MTC) documenting spectral elemental analysis (Ti balance, Al, V, Fe, C, N, H, O content) and physical mechanical pull testing. We also supply certificates of conformity for RoHS and REACH standards.